计静;徐智超;张文福;沈晶;周利剑;刘迎春;卢召红;王滨洲;

• 1:东北石油大学黑龙江省防灾减灾工程与防护工程高校重点实验室

• 2:南京工程学院建筑工程学院

• 3:大庆油田有限责任公司第二采油厂

• 4:中国石油天然气股份有限公司东北销售分公司

摘要(Abstract)：

为研究矩形钢管混凝土翼缘的H型蜂窝组合柱(STHCC)稳定性能,以截面形式、约束条件、构件长度和混凝土强度等级为主要参数,设计11根不同截面形式的H型蜂窝钢柱及18根STHCC构件;基于构件的简化力学模型和本构模型,利用ABAQUS有限元软件建立29根试件的有限元模型,开展构件的特征值屈曲分析,将有限元数值解与实验数据进行对比,两者吻合较好,验证有限元建模方法的合理性。基于18根STHCC构件特征值屈曲分析,提取变形云图和屈曲荷载,考察屈曲荷载随截面形式、构件长度、约束方式、混凝土强度等级和加劲肋的变化规律,给出STHCC在实际工程中的设计建议。结果表明:STHCC构件的整体稳定性比普通H型蜂窝钢柱、钢管翼缘的H型蜂窝钢柱的好,在相同用钢量条件下,屈曲荷载分别提高1.88、1.23倍;在STHCC构件钢管翼缘内设置加劲肋后,屈曲荷载提高1.31倍,合理设置加劲肋可以大幅提高组合柱的整体稳定性。随着混凝土强度等级的增加,构件屈曲荷载提高幅度越来越小。根据有限元数值解,通过简化混凝土影响系数建立STHCC构件的屈曲荷载计算公式,获得的屈曲模态为该类组合柱非线性稳定性能提供初始缺陷形态。

关键词(KeyWords)：H型蜂窝组合柱;钢管混凝土;ABAQUS;特征值屈曲;屈曲荷载;设计建议

Abstract:

Keywords:

基金项目(Foundation):教育部高等学校博士学科点专项科研基金项目(新教师类:20122322120004);; 国家自然科学基金项目(51178087);国家自然科学基金东北石油大学校培育基金项目(NEPUPY-1-16;NEPUQN2014-25);; 黑龙江省自然科学基金面上项目(E201336);; 黑龙江省级领军人才梯队后备带头人资助(RCHB-6);; 中国石油科技创新基金项目(2016D-5007-0608);; 东北石油大学校级研究生创新科研项目(YJSCX2016-031NEPU);; 黑龙江省教育厅科研专项经费东北石油大学优势科研方向凝练基金项目(2016YSFX-02)

作者(Author):计静;徐智超;张文福;沈晶;周利剑;刘迎春;卢召红;王滨洲;

Email:

参考文献(References)：

• [1]Wilkinson T,Judd M,Popplewell M,et al.Bearing capacity of hollow flange beams with web penetrations[C].Hongkong:13th International Symposium on Tubular Structures,2010.

• [2]Tharmarajah Anapayan,Mahen Mahendran.Improved design rules for hollow flange sections subject to lateral distortional buckling[J].Thin-Walled Structures,2012,50(1):128-140.

• [3]Hassanein M F,Kharoob O F,El Hadidy A M.Lateral-tensional buckling of hollow tubular flange plate girders with slender stiffened webs[J].Thin-Walled Structures,2013,65(2):49-61.

• [4]任亚文.矩形钢管翼缘梁抗弯性能的试验与理论研究[D].大庆:东北石油大学,2015.Ren Yawen.Experimental and theoretical investigation of bending behavior for rectangular steel tube flange beams[D].Daqing:Northeast Petroleum University,2015.

• [5]梁文峰.上翼缘为矩形钢管混凝土工字形梁的整体稳定承载力试验研究[D].大庆:东北石油大学,2016.Liang Wenfeng.Experimental research on global stability behavior of I-beams with top flange of rectangular concrete-filled steel tube[D].Daqing:Northeast Petroleum University,2016.

• [6]Akihiko Kawano,Chiaki Matsui.Cyclic local buckling and fracture of concrete filled tubular members[C].Banff:Proceedings of the Conference:Composite Construction in Steel and Concrete IV,2000:632-643.

• [7]Duan L,Reno M,Uang C.Effect of compound buckling on compression strength of built-up members[J].Engineering Journal,2002,39(1):30-37.

• [8]Razdolsky A G.Flexural buckling of laced column with crosswise lattice[J].Proceedings of the ICE-Engineering and Computational Mechanics,2008,161(2):69-76.

• [9]钟善桐.钢管混凝土结构[M].北京:清华大学出版社,2010.Zhong Shantong.The concrete-filled steel tubular structures[M].Beijing:Tsinghua University Press,2010.

• [10]Han Linhai,Yao Guohuang,Zhao Xiaoling.Tests and calculations for hollow structural steel(HSS)stub columns filled with selfconsolidating concrete(SCC)[J].Journal of Constructional Steel Research,2005,61(9):1241-1269.

• [11]Zhong Tao,Han Linhai,Wang Dongye.Strength and ductility of stiffened thin-walled hollow steel structural stub columns filled with concrete[J].Thin Walled Structures,2008,46(10):1113-1128.

• [12]Han Linhai,Ren Qingxi,Li Wei.Tests on stub stainless steel-concrete-carbon steel double-skin tubular(DST)columns[J].Journal of Constructional Steel Research,2011,67(3):437-452.

• [13]陈宝春,欧智菁.钢管混凝土格构柱极限承载力计算方法研究[J].土木工程学报,2008,41(1):55-63.Chen Baochun,Ou Zhijing.Calculation method for the ultimate load carrying capacity of concrete-filled steel tubular lattice columns[J].China Civil Engineering Journal,2008,41(1):55-63.

• [14]周婷.方钢管混凝土组合异形柱结构力学性能与工程应用研究[D].天津:天津大学,2012.Zhou Ting.Mechanical behavior and engineering application of special-shaped column composed of concrete-filled square steel tubes[D].Tianjin:Tianjin University,2012.

• [15]包博.钢管混凝土格构柱力学性能研究[D].哈尔滨:哈尔滨工业大学,2013.Bao Bo.Research on the mechanical property of concrete filled steel tubular laced column[D].Harbin:Harbin Institute of Technology,2013.

• [16]GB 50017—2003,钢结构设计规范[S].北京:中国建筑工业出版社,2003.GB 50017—2003,Code for design of steel structures[S].Beijing:China Building Industry Press,2003.

• [17]Key P W,Hancock G J.A theoretical investigation of the column behavior of cold-formed square hollow section[J].Thin-Walled Structures 1993,16(1):31-64.

• [18]刘威.钢管混凝土局部受压时的工作机理研究[D].福州:福州大学,2005.Liu Wei.Research on mechanism of concrete-filled steel tubes subjected to local compression[D].Fuzhou:Fuzhou University,2005.

• [19]王玉镯,傅传国.ABAQUS结构工程分析及实例详解[M].北京:中国建筑工业出版社,2010.Wang Yuzhuo,Fu Chuanguo.ABAQUS structural engineering analysis and detailed examples[M].Beijing:China Architecture&Building Press,2010.

• [20]张益凡.蜂窝梁的整体和局部稳定分析[D].长沙:中南大学,2008.Zhang Yifan.Global and local stability analysis of cellular beams[D].Changsha:Central South University,2008.

• [21]韩林海.钢管混凝土结构:理论与实践[M].北京:科学出版社,2007.Han Linhai.Concrete-filled steel tubular structures:Theory and practice[M].Beijing:Science Press,2007.