作者:尚宏志; 时间:2014-01-01 点击数:
尚宏志;
1:大庆油田有限责任公司采油工程研究院
摘要(Abstract):
针对大庆油田长期注水开发层间及层段内吸水矛盾问题,为提高高渗透层封堵效果,研制CYY-Ⅱ凝胶型调剖剂体系;为评价聚合物、交联剂、稳定剂和调节剂对调剖剂强度的影响,进行全因子实验,在筛选因素水平范围内分析凝胶强度的强影响因素及因素间的交互作用,建立回归方程,优化高强度凝胶配方并对配方进行岩心封堵实验.结果表明:优化筛选得到的最佳配方对渗透率为(650~2 015)×10-3μm2岩心的封堵率超过99%,配方现场应用207井次,连通油井取得较好的增油降水效果.
关键词(KeyWords):凝胶;调剖剂;全因子实验;回归方程;凝胶强度;影响因素;聚合物;交联剂;稳定剂
Abstract:
Keywords:
基金项目(Foundation):国家科技重大专项(2011ZX05052)
作者(Author):尚宏志;
Email:
参考文献(References):
[1]焦艳丽.大庆油田萨北开发区二类油层储层沉积模式[J].大庆石油学院学报,2010,34(3):19-22.Jiao Yanli.Depositional pattern of the classⅡoil reservoir in the north of Sa'ertu development area of Daqing oilfield[J].Journal of Daqing Petroleum Institute,2010,34(3):19-22.
[2]陈宏魁.喇嘛甸油田水驱浅调剖节能效果评价[J].石油石化节能,2013,20(9):46-48.Chen Hongkui.Shallow profile control effect evaluation of Lamadian oil field water flooding block[J].Energy Conservation in Petroleum&Petrochemical Industry,2013,20(9):46-48.
[3]吴淑云,张晶涛.萨中高台子油层浅调剖的实践与认识[J].大庆石油地质与开发,2005,24(3):61-62.Wu Shuyun,Zhang Jingtao.Practice and acknowledgment on shallow profile modification in Gaotaizi reservoirs in Sazhong area[J].Petroleum Geology&Oilfield Development in Daqing,2005,24(3):61-62.
[4]王玉琢,宋考平.化学浅调剖的调整挖潜及其效果[J].大庆石油学院学报,2001,25(3):77-80.Wang Yuzhuo,Song Kaoping.Structure adjusting and potentials tapping by general chemical profile control and the evaluation of its effect[J].Journal of Daqing Petroleum Institute,2001,25(3):77-80.
[5]刘一江,王香增.化学调剖堵水技术[M].北京:石油工业出版社,1999.Liu Yijiang,Wang Xiangzeng.The technology of chemical profile control and water shutoff[M].Beijing:Petroleum Industry Press,1999.
[6]朱敏.大庆油田扶余油层动态浅调剖技术[J].中外能源,2013,18(7):50-55.Zhu Min.Technology of dynamic shallow profile control in Fuyu reservoir of Daqing oilfield[J].Sino-Global Energy,2013,18(7):50-55.
[7]左海峰.萨中油田注水井化学浅调剖效果评价[J].油气田地面工程,2011,30(2):94-95.Zuo Haifeng.Effect evaluation on chemical profile control of water injection well in Sazhong oilfield[J].Oil-Gasfield Surface Engineering,2011,30(2):94-95.
[8]顾鑫磊.注水井浅调剖药剂问题简述[J].油气田地面工程,2011,30(6):48-49.Gu Xinlei.Injection well Shallow water profile control agent problem description[J].Oil-Gasfield Surface Engineering,2011,30(6):48-49.
[9]卢祥国,高养军,周福臣.复合离子型调剖剂配方优选及性能评价[J].大庆石油学院学报,2003,27(1):85-87.Lu Xiangguo,Gao Yangjun,Zhou Fuchen.Optimization design of formulations for compound ionic plugging agent[J].Journal of Daqing Petroleum Institute,2003,27(1):85-87.
[10]张继红,王亚楠,赵提财,等.低温调堵剂凝胶的流变特性[J].大庆石油学院学报,2008,32(3):34-36.Zhang Jihong,Wang Ya'nan,Zhao Ticai,et al.Rheological characteristics of low temperature plugging gel[J].Journal of Daqing Petroleum Institute,2008,32(3):34-36.
[11]Schramm G.实用流变测量学[M].北京:石油工业出版社,2009:139-143.Schramm G.Practical the rheological measurement science[M].Beijing:Petroleum Industry Press,2009:139-143.
[12]尚宏志,陈琳,张伟.CYY-Ⅱ型调剖剂流变特性评价及应用[J].采油工程,2012,2(2):1-3.Shang Hongzhi,Chen Lin,Zhang Wei.Rheological properties evaluation and application of CYY-Ⅱprofile control agent[J].Oil Production Engineering,2012,2(2):1-3.
[13]马林,何桢.六西格玛管理[M].北京:中国人民大学出版社,2007.Ma Lin,He Zhen.Six sigma management[M].Beijing:Chinese Renmin University Press,2007.
[14]马逢时,周暐,刘传冰.六西格玛管理统计指南[M].北京:中国人民大学出版社,2007.Ma Fengshi,Zhou Wei,Liu Chuanbing.Six sigma management guidelines[M].Beijing:Chinese Renmin University Press,2007.
[15]Liu He,Wang Xin,Li Guo,et al.An enhanced oil recovery technology continually after polymer-flooding[R].SPE 144250,2011.
[16]田士章,王永志,严万洪.堵水调剖剂堵水机理与性能评价[J].辽宁化工,2007,36(1):45-47.Tian Shizhang,Wang Yongzhi,Yan Wanhong.Mechanism and property of water plugging and profile controlagent[J].Liaoning Chemical Industry,2007,36(1):45-47.
[17]Montgomery D C.Design and analysis of experiments[M].6th ed.New York:Turing,2007.
[18]史胜龙,王业飞,于海洋,等.多孔介质中酚醛树脂冻胶动态成胶规律[J].大庆石油学院学报,2012,36(1):41-46.Shi Shenglong,Wang Yefei,Yu Haiyang,et al.Dynamic gelation in porous media of phenol resin gel[J].Journal of Daqing Petroleum Institute,2012,36(1):41-46.
2019 版权所有©东北石油大学 | 地址:黑龙江省大庆市高新技术产业开发区学府街99号 | 邮政编码:163318
信息维护:学报 | 技术支持:现代教育技术中心
网站访问量: