杨兰;李竞周;梁乃森;段艳;侯凯湖;

• 1:河北工业大学绿色化工与高效节能河北省重点实验室

摘要(Abstract)：

采用静态混晶法制备MCM-41/γ-Al2O3复合载体,并利用XRD、BET及Py-IR等方法对复合载体进行表征;以模型石脑油为原料,在固定床反应装置上评价以MCM-41/γ-Al2O3为载体的CoMo负载型催化剂的烯烃异构和加氢脱硫活性,考察制备过程中γ-Al2O3水和温度、模板剂用量、晶化温度、晶化时间等对复合载体中MCM-41结晶度及催化剂性能的影响.结果表明:当γ-Al2O3水合温度为135℃、晶化温度为125℃、晶化时间为24h、投料摩尔比为n(γ-Al2O3)∶n(SiO2)∶n(NaOH)∶n(CTAB)(十六烷基三甲基溴化铵)∶n(H2O)=0.06∶1.0∶0.3∶0.15∶90时,所得MCM-41/γ-Al2O3复合载体具有规整有序的介孔孔道、较大的比表面积(750m2/g)和比孔容(0.55cm3/g)及较窄的孔径分布(2~3nm),对应的CoMo/MCM-41-γ-Al2O3催化剂具有较优异的催化性能.磷(P)改性可有效增加载体的酸量和调节载体的酸分布;载体1%P(质量分数)改性可改善催化剂的异构和加氢脱硫性能.在温度为265℃、压力为1.5MPa、氢油体积比为300、空速为2h-1时,模拟原料油的异构化率、脱硫率分别为76.5%、96.5%.

关键词(KeyWords)：MCM-41/γ-Al2O3复合材料;异构;加氢脱硫;催化剂

Abstract:

Keywords:

基金项目(Foundation):河北省自然科学基金项目(B2010000036)

作者(Author):杨兰;李竞周;梁乃森;段艳;侯凯湖;

Email:

参考文献(References)：

• [1]涂先红,方向晨,赵乐平.FCC汽油加氢脱硫降烯烃技术进展[J].当代化工,2006,35(2):114-116.Tu Xianhong,Fang Xiangchen,Zhao Leping.Development of technologies to hydrodesulfurization and oolefin-reducing for FCC gaso-line[J].Contemporary Chemical Industry,2006,35(2):114-116.

• [2]黄磊,蔡智.降低FCC汽油硫含量技术的应用[J].石油炼制与化工,2006,37(4):7-10.Huang Lei,Cai Zhi.Application of technologies for reducing sulfur content in FCC naphtha[J].Petroleum Processing and Petrochem-icals,2006,37(4):7-10.

• [3]宋华,陆明庆,马阿妮,等.正戊烷异构化反应条件及反应动力学[J].大庆石油学院学报,2003,27(2):31-33.Song Hua,Lu Mingqing,Ma A'ni,et al.Conditions and kinetic ofn-Pentane isomerization reaction[J].Journal of Daqing PetroluemInstitute,2003,27(2):31-33.

• [4]Gopal S,Smirniotis P G.Pt/H-ZSM-12as a catalyst for the hydroisomerization of C5-C7n-alkanes and simultaneous saturationof benzene[J].Applied Catalysis A,2003,247(1):113-123.

• [5]Talukdar A K,Bhattacharyya K G,Baba T,et al.1-Hexene isomerization and n-hexane cracking over HMCM-22[J].AppliedCatalysis A,2001,213(2):239-245.

• [6]韩崇仁.加氢裂化工艺与工程[M].北京:中国石化出版社,2001:7-9.Han Chongren.Hydrocracking technology and engineering[M].Beijing:China Petrochemical Press,2001:7-9.

• [7]姜琳琳,龙化云,靳凤英,等.Ti-MCM-41在全馏分FCC汽油改质中的催化性能研究[J].石油炼制与化工,2012,43(10):5-10.Jiang Linlin,Long Huayun,Jin Fengying,et al.Study on the catalytic performance of Ti-MCM-41in full range FCC gasoline up-grading[J].Petroleum Processing and Petrochemicals,2012,43(10):5-10.

• [8]梁乃森,许楠,张舜光,等.分子筛-氧化铝基FCC汽油异构/加氢脱硫催化剂研究[J].高校化学工程学报,2012,26(5):883-888.Liang Naisen,Xu Nan,Zhang Shunguang,et al.Study on the catalysts supported on molecular Sieve-Alumina composite for FCC gas-oline isomerization/hydrodesulfurization[J].Journal of Chemical Engineering of Chinese Universities,2012,26(5):883-888.

• [9]董群,金丽梅,赵成娟,等.催化裂化汽油吸附剂脱硫工艺[J].大庆石油学院学报,2004,28(3):34-36.Dong Qun,Jin Limei,Zhao Chengjuan,et al.Adsorbents for removing sulfur in FCC gasoline[J].Journal of Daqing Petroluem Insti-tute,2004,28(3):34-36.

• [10]管延彬.加氢处理催化剂的预硫化技术进展[J].齐鲁石油化工,2004,32(3):195-198.Guan Yanbin.A precured progress of hydrogenation catalysts[J].Qilu Petrochemical Technology,2004,32(3):195-198.

• [11]Kresge C T,Leonowicz M E,Roth W J,et al.Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mecha-nism[J].Nature,1992,359:710-712.

• [12]黄伟莉,刘白军,孙发民,等.以水合Al2O3为基体合成MCM-41/γ-Al2O3复合材料[J].石油学报(石油加工),2005,21(5):54-60.Huang Weili,Liu Baijun,Sun Famin,et al.Synthesis of MCM-41/γ-Al2O3composites derived from hydratedγ-Al2O3[J].ActaPetrolei Sinica(Petroleum Processing Section),2005,21(5):54-60.

• [13]Huang Weili,Liu Baijun,Sun Famin,et al.Synthesis and characterization of thermally stable MCM-41/γ-Al2O3composite mate-rials[J].Microporous and Mesoporous Materials,2006,94(1-3):254-260.

• [14]窦涛,冯芳霞,郑利民,等.纯硅MCM-41中孔分子筛合成因素的研究Ⅱ——表面活性剂对合成的影响[J].燃料化学学报,1998,26(3):243-247.Dou Tao,Feng Fangxia,Zheng Limin,et al.Studies on pure silica MCM 41mesoporous molecular sieve synthesis factorsⅡ-Effectof surfactant on synthesis[J].Journal of Fuel Chemistry and Technology,1998,26(3):243-247.

• [15]Zhang J,Goldfarb D.In situ investigations of the formation mechanism of mesoporous materials via the dynamics and ordering ofspin-probes-pH and Si/surfactant effect[J].Microporous and Mesoporous Materials,2001,48(1/2/3):143-149.

• [16]禹剑,王连洲,施剑林,等.低表面活性剂/硅比率中有序介孔材料的合成[J].无机材料学报,2000,15(1):59-61.Yu Jian,Wang Lianzhou,Shi Jianlin,et al.Synthesis of ordered mesoporous aluminosilicate under a low surfactant/silica molar ratiocondition[J].Journal of Inorganic Materials,2000,15(1):59-61.

• [17]安群力.介孔分子筛MCM-41的合成及性能研究[D].西安:西安科技大学,2000.An Qunli.Studies on the synthesis and properties of mesoporous molecular sieve MCM-41[D].Xi'an:Xi'an University of Scienceand Technology,2000.

• [18]Blin J L,Otjacques C,Herrier G,et al.Kinetic study of MCM-41synthesis[J].International Journal of Inorganic Materials,2001,3(1):75-86.

• [19]汪颖军,孙博,张海菊.MCM-48催化剂的合成、表征与异构化性能分析[J].大庆石油学院学报,2009,33(1):52-55.Wang Yingjun,Sun Bo,Zhang Haijv.Synthesis,characterization and isomerization performance analysis of MCM-48catalysts[J].Journal of Daqing Petroluem Institute,2009,33(1):52-55.

• [20]李丽华,王秀绘,于延云,等.磷酸和水蒸汽联合改性Hβ分子筛的表征及催化性能[J].工业催化,2006,14(6):46-49.Li Lihua,Wang Xiuhui,Yu Yanyun,et al.Characterization and catalytic properties of steam-phosphorus modified Hβzeolites[J].Industrial Catalysis,2006,14(6):46-49.

• [21]范煜,鲍晓军,石冈,等.载体组成对Ni-Mo/硅铝沸石基FCC汽油加氢异构化与芳构化催化剂性能的影响[J].石油学报(石油加工),2005,21(2):1-7.Fan Ye,Bao Xiaojun,Shi Gang,et al.Effect of carrier composition on hydroisomerization and aromatization performances of Ni-Mo/alumino-silicate zeolite catalysts for FCC gasoline upgrading[J].Acta Petrolei Sinica(Petroleum Processing Section),2005,21(2):1-7.

• [22]许楠,梁乃森,张舜光,等.β-MCM-41的制备及在汽油异构/脱硫中的应用[J].石油学报(石油加工),2012,28(6):913-919.Xu Nan,Liang Naisen,Zhang Shunguang,et al.Synthesis ofβ-MCM-41and its application in gasoline isomerization/hydrodesul-furization[J].Acta Petrolei Sinica(Petroleum Processing Section),2012,28(6):913-919.